Superalloy Blisk Machining

Workpiece

Superalloy
Min Blade Thickness: 0.3mm

fe89afce6c6010cc4b2e5b3af88ea52 - Conprofe Technology Co., Ltd.

Challenges

Noticeable chatter marks on the surface
Poor surface quality (Roughness Sa 0.93μm)

Benefits

Reduced cutting force and improved surface quality
Blade roughness reduced by 56%, from Sa 0.93μm to Sa 0.408μm

27 - Conprofe Technology Co., Ltd. — <strong>Cycle TimesHole<strong>

2023.12.29-Six-Industry-V1.5_19 - Conprofe Technology Co., Ltd.

ac42ba05b5d6149341423a63dc37ead-1 - Conprofe Technology Co., Ltd.

Workpiece

Benefits

Nomex Honeycomb Contouring

图片宽度:400px, 图片高度:293px

Challenges

Uneven machined surface, severe burrs and excessive dust
Vulnerable to workpiece deformation, tearing and collapse due to compression

Burr reduction by 90%

Efficient 5-axis contouring of complicated shapes

Optional fully-closed protection and vacuum system against dust and explosion

Workpiece

Nomex Honeycomb Contouring

Challenges

Uneven machined surface, severe burrs and excessive dust
Vulnerable to workpiece deformation, tearing and collapse due to compression

Benefits

Burr reduction by 90%
Efficient 5-axis contouring of complicated shapes
Optional fully-closed protection and vacuum system against dust and explosion

RELATED CASES

AlSiC Threaded Hole Machining

More

Quartz Glass Substrate Chamfer & Side Machining

More

Quartz Glass Showerhead Drilling

More

Single Crystal Silicon Showerhead Hole Drilling

More

Single Crystal Silicon Showerhead Hole Drilling

More

Name (required)*

Email (required)*

Industry

Solutions

Message*